Choosing the Active Server
6700-A2-GB22-20
Use Active Server... to choose the active server for the NMS client. After you
choose an active server with this command, the NMS client uses the IP address
you set up using NMS Servers... to communicate with that server.
Procedure
1. Select Workstation from the Main Menu.
2. Choose Active Server... The Active Server dialog box appears.
3. Select a server from the Available NMS Servers listbox.
4. Choose OK. The Main Menu appears.
NOTE:
If you change the NMS server while the NMS is active, you must restart
NMS.
February 1998
Workstation Settings
2-3