Interfaces; Adding An Interface; Duplicating An Interface - Paradyne COMSPHERE 6700 Series Network Configuration Manual

Configuration Files and Interfaces

Interfaces

Adding an Interface

Duplicating an Interface

3-2
Use the Interface menu on the Custom window to add, duplicate, or delete an
interface. You must configure at least one interface.
Use Add on the Custom window's Interface menu to add an interface to a
configuration file.
Procedure
1. Choose Settings from the Network menu. The Custom window appears.
2. Choose Interface from the Custom window menu bar.
3. Choose Add from the Interface menu. The Add Interface window appears.
4. Select the type of interface using the selection list button to the right of the
Type field.
5. Enter the name of the interface in the Name field. The default is Ethernet0.
6. Choose OK.
Use Duplicate on the Custom window's Interface menu to create copies of an
interface that differ only slightly. For example, use Duplicate for the same IP,
subnet, and port where each interface has its own telephone number.
Procedure
1. Choose Settings from the Network menu. The
shown on page 3-1.
2. Select the interface from the bottom of the Custom window.
3. Choose Interface from the Custom window menu bar.
February 1998
Custom window appears, as
6700-A2-GB22-20