Workstation Settings; Workstation Setup; Adding Names And Ip Addresses - Paradyne COMSPHERE 6700 Series Network Configuration Manual

Workstation Settings

Workstation Setup

Adding Names and IP Addresses

6700-A2-GB22-20
This chapter provides procedures for configuring a workstation's server-related
settings.
For each NMS multiuser client, you must designate a server, and each NMS
server must have a name and Internet Protocol (IP) address.
Use NMS Servers... to build a database of NMS server names and IP addresses.
You can then use this database to select the NMS server for a multiuser client.
Procedure
1. Select Workstation from the Main Menu.
2. Choose NMS Servers... The NMS Servers dialog box appears.
3. In the Name field, enter the name of the NMS server (maximum
15 characters).
4. In the IP Address field, enter the NMS server IP address.
5. Choose Add. The new name and IP address appear in the Available NMS
Servers list box.
6. Repeat Steps 3–5 for each IP address you need to add.
7. Choose Close from the Control menu to return to the Main Menu.
February 1998
2
2-1