Quick Start Procedure - Paradyne 3162 Quick Reference

Quick Start Procedure

The following procedure is for experienced DSU/CSU users who are familiar with the
3162 DSU/CSU installation process and have no special requirements for their
application. See the ACCULINK 3162 Data Service Unit/Channel Service Unit User's
Guide for more information.
1. Attach the power cord to the rear of the DSU/CSU and the other end to a grounded
115 Vac power outlet.
2. Attach the 3162 DSU/CSU network connection to the T1 network using the
appropriate cable. Attach the 3162 DSU/CSU to the customer premises equipment
via the DTE (DSX-1) and/or port connectors.
3. Power on the DSU/CSU to perform the power-up self-test.
COM Network
Port Port
PORT 2
POWER PORT 1
NEC
CLASS 2 AUX COM
INPUT CAUTION:
AUX PORT OR COM PORT MUST NOT BE CONNECTED TO PSTN OR T1 NETWORK
Power
Terminal
NETWORK
3162
EXT. CLOCK
DSU/CSU
DSX-1
3162
NETWORK
DSU/CSU
Power
SNMP
Manager
Cabling Examples
2
COM
Network
Port
Port
PORT 2 EXT. CLOCK
POWER PORT 1 DSX-1
NEC
CLASS 2 AUX COM
INPUT CAUTION:
AUX PORT OR COM PORT MUST NOT BE CONNECTED TO PSTN OR T1 NETWORK
or or
Terminal
NETWORK
97-15575