Paradyne 3162 Quick Reference page 13

Table 7. User Interface – Communication Port Configuration Options (2 of 2)
Option Factory 1
Data Rate:
Character Length: Character Length:
Parity:
Stop Bits:
Ignore Control Ignore Control
Leads:
Password Required: Password Required:
Inactivity Timeout: Inactivity Timeout:
Disconnect Time: Disconnect Time:
Factory 2
1.2 1.2
2.4 2.4
4.8 4.8
9.6 9.6
14.4 14.4
19.2 19.2
38.4 38.4
7 7
8 8
None None
Even Even
Odd Odd
1 1
1.5 1.5
2 2
Disable Disable
DTR DTR
Enable Enable
Disable Disable
Enable Enable
Disable Disable
5 5
Up Up
Down Down
Save Save
11
Comments/Description
Selects the bit rate for the COM
port. port.
Selects the character length for the Selects the character length for the
COM port.
Selects the parity for the COM port. p y
Selects the number of stop bits for
the COM port. the COM port.
Specifies whether the COM port Specifies whether the COM port
ignores DTR.
Controls whether a password is Controls whether a password is
required during a call setup.
Specifies whether the p
communication port disconnects communication port disconnects
after a certain period of inactivity.
Specifies the period of inactivity
(1 to 60 minutes) that causes a (1 to 60 minutes) that causes a
disconnect if Inactivity Timeout is
enabled. enabled.
p