Paradyne 3162 Quick Reference page 15

Table 9. User Interface – Telnet Sessions Configuration Options
Option Factory 1
Telnet Session: Telnet Session:
Password Required: Password Required:
Inactivity Timeout: Inactivity Timeout:
Disconnect Time: Disconnect Time:
Table 10. User Interface – Auxiliary Port Configuration Options
Option Factory 1
Port Use:
Data Rate (Kbps): Data Rate (Kbps):
Factory 2
Enable Enable
Disable Disable
Enable Enable
Disable Disable
Enable Enable
Disable Disable
5 5
1–60 1–60
Factory 2
None None
Mgmt Mgmt
Daisy Daisy
9.6 9.6
14.4 14.4
19.2 19.2
38.4 38.4
13
Comments/Description
Specifies whether the DSU/CSU p
responds to Telnet session responds to Telnet session
requests.
Specifies whether a password is Specifies whether a password is
required for Telnet sessions.
Specifies whether a Telnet session p
disconnects after a certain period disconnects after a certain period
of inactivity.
The period of inactivity (1 to
60 minutes) that causes a 60 minutes) that causes a
disconnect if Inactivity Timeout is
enabled.
Comments/Description
Controls how the auxiliary port is
used. used.
Configures the bit rate for the Configures the bit rate for the
auxiliary port.