Paradyne 3162 Quick Reference page 14

Table 8. User Interface – External Device Configuration Options
Option Factory 1
External Device E t l D i
Commands: Commands:
Dial-In Access: Dial-In Access:
Connect Prefix: Connect Prefix:
Connect Indication Connect Indication
String:
Escape Sequence: Escape Sequence:
Escape Sequence Escape Sequence
Delay (sec):
Disconnect String: Disconnect String:
Factory 2
Disable Disable
AT AT
Other Other
Enable Enable
Disable Disable
[Text Field] [Text Field]
Clear Clear
[Text Field] [Text Field]
Clear Clear
[Text Field] [Text Field]
Clear Clear
None None
0.2 0.2
0.4 0.4
0.6 0.6
0.8 0.8
1.0 1.0
[Text Field] [Text Field]
Clear Clear
12
Comments/Description
Controls whether no commands, Controls whether no commands,
AT commands, or AT d
user-configurable commands are user-configurable commands are
sent out the COM port.
Controls whether dial-in access is
allowed from the external device allowed from the external device
connected to the COM port.
Allows you to enter up to
20 characters to be used with the 20 characters to be used with the
dial directory phone number.
Allows you to enter up to
20 characters used to determine 20 characters used to determine
whether a connection has been
established.
Allows you to enter up to
20 characters to identify the COM 20 characters to identify the COM
port's escape sequence.
Specifies the delay in seconds
required before and after the required before and after the
user defined escape sequence. user-defined escape sequence.
Allows you to enter up to
20 characters to be used as the 20 characters to be used as the
COM port's disconnect string.