Paradyne 3162 Quick Reference page 8

Table 2. DTE Interface Configuration Options
Option Factory 1
Interface Status: Interface Status:
Line Framing Line Framing
Format:
Line Coding Format: Line Coding Format:
Line Equalization:
DTE LB on External
Contact: Contact:
Send All Ones on Send All Ones on
DTE Failure:
Line 1 Displays: Line 2 Displays:
DTE Signaling g g
D01 D02... D24: D01 D02 D24:
Factory 2
Enable Enable
Disable Disable
D4 D4
ESF ESF
AMI AMI
B8ZS B8ZS
0–133 0–133
133–266 133–266
266–399 266–399
399–533 399–533
533–655 533–655
Enable Enable
Disable Disable
Enable Enable
Disable Disable
Meaning
Voice
RBS
Channel
None Data Channel
6
Comments/Description
Enables the use of the DTE Enables the use of the DTE
Drop/Insert port.
Selects D4 or ESF framing format. Selects D4 or ESF framing format
Selects AMI or B8ZS line coding Selects AMI or B8ZS line coding
format.
Provides selectable extended DTE
range capability. range capability.
Allows control of DLB on external Allows control of DLB on external
contact closure.
Sends all ones on channels
allocated to the network T1 on allocated to the network T1 on
LOS, LOF, or AIS.
Comments/Description
Specifies which channels from the
DTE Drop/Insert interface are p
voice channels and should pass voice channels and should pass
RBS information to the network.