Paradyne 3162 Quick Reference page 17

Table 12. Management and Communication – Communication Protocol
Configuration Options
Option Factory 1
[Text Field]
Node IP Adr: Node IP Adr:
[Text Field]
Node Subnet Mask: Node Subnet Mask:
Default Network
Destination: Destination:
[Text Field]
Communications Communications
Port IP Address:
[Text Field]
Communication Port Communication Port
Subnet Mask:
Com Link Protocol: Com Link Protocol:
[Text Field]
Auxiliary Port Auxiliary Port
IP Address:
[Text Field]
Auxiliary Port Auxiliary Port
Subnet Mask:
Factory 2
[Text Field]
Clear Clear
[Text Field]
Clear Clear
None None
Com Com
Aux Aux
FDL FDL
EDL n EDL n
[Text Field]
Clear Clear
[Text Field]
Clear Clear
PPP PPP
SLIP SLIP
[Text Field]
Clear Clear
[Text Field]
Clear Clear
15
Comments/Description
The IP address needed to access The IP address needed to access
the DSU/CSU.
The Subnet Mask needed to The Subnet Mask needed to
access the device.
Specifies the default network
destination. destination.
The IP address for the COM port p
when the Port Use configuration when the Port Use configuration
option is set to Mgmt or Daisy.
The Subnet Mask needed to
access the device when the Port access the device when the Port
Use configuration option is set to
Mgmt or Daisy.
The link layer protocol for the COM
port when the Port Use port when the Port Use
configuration option is set to Mgmt
or Daisy.
Specifies the alternate modem
Subnet Mask needed to access the
device when the Port Use device when the Port Use
configuration option is set to Mgmt
or Daisy.
Specifies the Subnet Mask needed
to access the device when the Port to access the device when the Port
Use configuration option is set to
Mgmt or Daisy.