Paradyne 3162 Quick Reference page 19

Table 15. Management and Communication – SNMP Traps
Configuration Options
Option Factory 1
SNMP Traps: SNMP Traps:
Number of Trap Number of Trap
Managers:
NMS n IP Address: NMS n IP Address:
Destination:
General Traps: General Traps:
Enterprise Specific Enterprise Specific
Traps:
Link Traps: Link Traps:
Link Trap Interfaces: Link Trap Interfaces:
Factory 2
Enable Enable
Disable Disable
1 1
2–6 2–6
[Text Field] [Text Field]
Clear Clear
None None
Com Com
Aux Aux
FDL FDL
EDL n EDL n
Disable Disable
Warm Warm
AuthFail AuthFail
Both Both
Enable Enable
Disable Disable
Disable Disable
Up Up
Down Down
Both Both
Network Network
DTE DTE
T1s T1s
Ports Ports
All All
17
Comments/Description
Specifies whether SNMP traps are p p
sent over the SNMP management sent over the SNMP management
link.
The number of trap managers The number of trap managers
supported by the device.
Specifies the IP address for each
trap manager. This configuration trap manager. This configuration
option is repeated for all n
managers.
Specifies the network destination
for Trap Manager n . for Trap Manager n .
Specifies the general trap types to p g p yp
enable: WarmStart Authentication enable: WarmStart, Authentication
Failure or both. Failure or both.
Specifies whether the p
enterpriseSpecific traps are enterpriseSpecific traps are
enabled.
Specifies the link trap type to p p yp
Enable: Trap on Link Up Link Enable: Trap on Link Up, Link
Down, or both. Down, or both.
When any link trap types are When any link trap types are
Enabled, specifies which links to , p
send traps for. send traps for