Quick Start Procedure - Paradyne 3166 Quick Reference

Quick Start Procedure

The following procedure is for experienced DSU/CSU users who are familiar with the
3166 DSU/CSU installation process and have no special requirements for their
application. See the ACCULINK 3166 DSU/CSU User's Guide for more information.
1. Install the rear connector module loosely onto the 3000 Series Carrier. Do not
tighten the screw.
3000 Series
Carrier
Slots
NOTE:
If an auxiliary backplane for Models 3151 or 3161 DSUs is installed in the
same carrier, verify that it is mounted over slots 9–16. Slot 9 is rendered
inaccessible if the auxiliary backplane is mounted over slots 1–8.
Rear
Connector
Module
Tabs
98-16083
2