Paradyne 3162 Quick Reference page 7

Factory default configuration options are shown in boldface type in the following tables.
Table 1. Network Interface Configuration Options
Option Factory 1
Line Framing Line Framing
Format:
Line Coding Format: Line Coding Format:
Bit Stuffing: Bit Stuffing:
Line Build Out (LBO): Line Build Out (LBO):
Management Link: Management Link:
ANSI Performance ANSI Performance
Report Messages:
Network Initiated Network Initiated
LLB:
Network Initiated Network Initiated
PLB:
Circuit Identifier: Circuit Identifier:
Factory 2
D4 D4
ESF ESF
AMI AMI
B8ZS B8ZS
62411 62411
Part68 Part68
Disable Disable
0.0 0.0
–7.5 –7.5
–15 –15
–22.5 –22.5
Enable Enable
Disable Disable
Enable Enable
Disable Disable
Enable Enable
Disable Disable
Enable Enable
Disable Disable
[Text Field] [Text Field]
Clear Clear
5
Comments/Description
Selects D4 or ESF framing format. Selects D4 or ESF framing format
Selects AMI or B8ZS line coding Selects AMI or B8ZS line coding
format.
Provides enforcement of ones Provides enforcement of ones
density protection per d it t ti
AT&T TR 62411, ANSI T1-403, and AT&T TR 62411, ANSI T1-403, and
FCC Part 68 Technical Publication.
Provides Line Build Out in dB. Provides Line Build Out in dB
Specifies whether the FDL s Specifies whether the FDL's
Management Link is enabled.
Sends ANSI Performance Report Sends ANSI Performance Report
Messages.
Network-initiated LLB allows LLB to Network-initiated LLB allows LLB to
be controlled by inband LLB codes.
Network-initiated PLB allows PLB
to be controlled by FDL PLB to be controlled by FDL PLB
messages.
Specifies the transmission vendor s Specifies the transmission vendor's
circuit identifier.