Paradyne 3162 Quick Reference page 12

Table 6. General Configuration Options
Option Factory 1
Generate Yellow Generate Yellow
Alarm Signals:
Self-Test: Self-Test:
Test Timeout: Test Timeout:
Test Duration: Test Duration:
Primary Clock
Source: Source:
External Clock Rate: External Clock Rate:
Table 7. User Interface – Communication Port Configuration Options (1 of 2)
Option Factory 1
Port Use: Port Use:
Asynchronous
Port Type: Port Type:
Synchronous
Clock Source: Clock Source:
Factory 2
Enable Enable
Disable Disable
Enable Enable
Disable Disable
Enable Enable
Disable Disable
10 10
Up Up
Down Down
Save Save
Network Network
DTE DTE
Internal Internal
External External
Port 1 Port 1
2048 2048
1544 1544
8 8
Factory 2
Mgmt Mgmt
ASCII ASCII
Daisy Daisy
Terminal Terminal
Asynchronous
Synchronous
Internal Internal
External External
10
Comments/Description
Yellow alarm is generated by the Yellow alarm is generated by the
DSU/CSU on LOS, LOF, or AIS.
Allows bypass of self-test on Allows bypass of self-test on
initialization.
Specifies whether the durations of p
user-initiated tests are limited by user initiated tests are limited by
Tst Duration.
Specifies the duration of Specifies the duration of
user-initiated loopback and pattern i iti t d l b k d tt
tests. es s
Selects the clock source to be Selects the clock source to be
used as the master clock for the used as the master clock for the
DSU/CSU. DSU/CSU
Selects the clock rate of the source
if external. if external.
Comments/Description
Controls how the COM port is Controls how the COM port is
used.
Controls whether the COM port is Controls whether the COM port is
synchronous or asynchronous.
Controls whether the COM port Controls whether the COM port
uses an internal or external clock.