Step 2: Chargingthe Battery Pack - Sony HANDYCAM DCR-DVD910 Operating Manual

Step 2: Chargingthe battery pack
POWER switch
--Battery
Jack cover
DC plug
IN jack
"5 \/ 1
"__ CHG (charge)lamp
AO__Adaptor 4_T=_'
_°tlt_sew_l;t_utlet
Power cord (mains lead)
You can charge the "InfoLITHIUM"
battery pack (H series) (p. 115) after
attaching it to your camcorder.
tO Notes
• Your camcorder operates only with
"InfoLITHIUM" battery pack (H series).
4
/ Turn the POWER switch in the
direction of the arrow to OFF
(CHG) (the default setting).
4
Open tile jack cover, and connect the
DC plug of the AC Adaptor.
Match the • mark on the DC plug with
the • mark on your camcorder.
Connect the power cord (mains
lead) to the AC Adaptor and the
wall outlet (wall socket).
Tile CHG (charge) lamp lights up and
charging starts.
Align the terminals of the battery
pack and your camcorder (O),
then attach the battery pack in the
direction of the arrow until it
clicks (Q).
5
The CHG (charge) lamp turns off
when the battery is fully charged.
Disconnect the AC Adaptor from
the DC IN jack.
3
Connect the AC Adaptor to the
DC IN jack of your camcorder.
2O