Sony HANDYCAM DCR-DVD910 Operating Manual page 90

Fu_ions se_ i_ the _OPTION
MENU (Oon_i_ued}
• When you select [ONE PUSH], keep flaming
white ohject while ixmz_ is flashing quickly.
• t:xmzl flashes slowly if [ONE PUSH] could not
be set.
• When [ONE PUSH] was selected, if txmL! keeps
flashing aller touching [_]_ sel [WHITE
BAL.] to [AUTO].
• If you sel [WHITE BAL.], [SCENE
SELECTION] is aumnlalically set to [AUTO].
"_° Tips
• It you changed tile battery pack, or moved your
camcorder to or li'om outdoors when [AUTO]
was se]ected, ilill] your calncor(ler tit il ne_lrby
white object with [AUTO] lor about I0 seconds
lor better coh)r balancc adjustmcnt.
• If you changed the [SCENE SELECTION]
_tling or nloved your canlcorder to or lronl
outdoors during white balance setting with
[ONE PUSHI, you need to repeat the [ONE
PUSHI operation.
When you set [COLOR SLOW SHTR] to
[ON], you can record an image brighter in
color even in dark places.
['_"]appears on the screen.
To cancel [COLOR SLOW SHTR], touch
IOFFI.
O
Notes
• Adjust tile focus manually ([FOCUS], p. 87)
when it is hard to lbcus automatically.
• The shuoer spe_d of your camcorder changes
depending on the brighmess, which may rcsu]l
in a slowdown of tile motion of tile image.
The image will be recorded at a maxinmm
of 16 times the sensitivity of NightShot
recording if you set [SUPER
NIGHTSHOT] to [ON] while the
NIGHTSHOT switch (p. 37) is also set to
ON.
S{_ appears on the screen.
To relurn to the normal setting, set [SUPER
NIGHTSHOT] to [OFF].
0 Notes
• Do not use [SUPER NIGHTSHOT] ill hright
placcs. This may cause a malfimction.
• Do not cover tile inliared port with your fingers
or odler objects lP- 125).
• Rmnove the conversion lens (optional).
• Adjust the lbcus manually/[FOCUSI, p. 87)
when it is hard to lk)cus automatically.
• The shutter speed of your camcorder changes
depending on the brighmess, which may result
ill a slowdown of tile motion of tile image.
You can record a transition with the
following effects adding to the interval
belween scenes.
(!) Select the desired effect in [STBY] (during
fiJding in) or [REC] (during fading out)
mode, then touch [_].
@ Press START/STOP.
The fader indicator stops flashing and
disap?ears when the fade is complete.
To cancel the fader before starting the
operation, touch [OFtq in step @.
If you press START/STOP. the setting is
cleared.
Fading out
WHITE FADER
BLACK FADER
Fading in
gO