Sony HANDYCAM DCR-DVD910 Operating Manual page 113

Maintenanceand precautions
See page 12 for the details of discs
which you can use with your
camcorder.
Notes on use
• Hold the disc by ils edge while supporling tile
center hole lightly. Do not touch tile recording
side (tile opposite of tile prinled side when using
a single-sided disc).
• Befl)lC shooting, be sure 1o remove dust and
lingerprinls liom the disc wilh a soft cloth.
Otherwise you may not be able 1o record or play
normally in sortie situalions using that disc.
• When you set lhe disc in your camcorder, press
firmly until il clicks. When the message
[C: 13:N12]] appears on lhe LCD screen, open
the disc cover and set lhe disc again.
• Do not attach any adhesive material such as a
sticker on tile surlacc of a disc. If you do so, the
disc may become unbalanced, and this may
cause a malfunction of the disc or your
camcorder.
Useof double-sideddiscs
Double-sided discs Mlow you to rccord both sides
of a disc.
N Recording on the A side
Place the disc in your camcorder with the
side with the _ symbol at the center facing
outwards until it clicks.
[] symbol
Place tile [] symbol lacing
ol/[wards.
Recording is made on lhe rear side.
• When using a double-sided disc, take care not 1o
snmdge lhe surlace with fingerprints.
• When a double-sided disc is used in your
camcorder, rccording/playback are perlormed
on lhat side only. You cannot switch to record
on or play back lhe olher side with the disc set to
the camcorder. When recording/playback of one
side is complete, rcmove the disc and turn it
over to access tile <)tiler side.
• Pcrlorm tile lollowing operations on each side
of a double-sided disc:
Finalizing lP. 62)
Formatting (p. 66)
Unfinalizing (p. 68)
_=:.
g
m
=Z
3
g
Continued._
113