Step 2: Chargingthe Battery Pack - Sony Handycam DCR-HC62 Operating Manual

Step 2: Chargingthe battery pack
2
31
Battery pack
plug
DC IN jack
4
To the wall outlet
(wall socket) AC Adaptor
Power cord (Mains lead)
You can charge the "InfoLITHIUM"
battery pack (H series) (p. 81) after
attaching it to your camcorder.
O Notes
• You cannot attach any +'lntoL]TH[UM" battmy
pack oth_f th;tll the H _l'it3S 10 youf CftI/]CoI'dCI',
1 Align the terminals of the battery
pack and your camcorder O, then
attach the battery pack and click
it into place Q.
#t
," Slide the POWER switch in the
direction of the arrow to
OFF(CHG) (The default setting).
With the • mark on the DC plug
facing down, connect the AC
Adaptor to the DC IN jack on your
camcorder.
POWER switch
4
Connect the power cord (mains
lead) to the AC Adaptor and the
wall outlet (wall socket).
The CHG (charge) lamp lights up and
charging starts. The CHG (charge) lamp
turns off when tile battery is fully
charged. Disconnect the AC Adaptor
from the DC IN jack.
O Notes
• Disconnect the AC Adaptor h'onl the DC IN
jack holding both the camcorder and the DC
plug.
12