8: Attaching The Stand - Sony HT-K250 Operating Instructions Manual

8: Attaching the stand

You can use the control center in an upright
position or laid flat. When using in an upright
position, be sure to attach the supplied control
center stand. Besides, you can change the item
layout in the display according to the layout of
the control center (page 18).
Using the control center in
the upright position
Attach the stand to the screw hole on the
side of the control center using the
supplied screw.
m
Notes
• Be sure to attach the stand when using the control
center in the upright position.
• Use the supplied stand only when you use the control
center in an upright position. Do not attach the stand
when you use the control center laid flat.
• To move the control center, hold the control center
itself. If you hold the stand, it may break.
• Do not use the control center in an upright position
without attaching the stand. If you do not attach the
stand, the control center will be unstable and may fall
over.
• Be sure to keep the screws out of reach of the
children.
Using the control center laid
flat
Place the control center flat on a level
surface.
GB
13