Setting Garden Area Mowing Priorities; Temporary No-Cut Zone; Stay Away - Stiga A 500 Instruction Manual

Procedure:
1. To delete a map item, select it from the App's 'settings' menu and press the 'delete' button.
2. To change the virtual perimeter, select the desired virtual zone from the App's 'Settings' menu and
press the 'Edit' button. Then follow the App wizard.

4.7.24. SETTING GARDEN AREA MOWING PRIORITIES

The different virtual areas of the garden are mowed in the order in which they are programmed.
It is possible to change the mowing priority of individual zones to vary the order in which they are mowed.
Procedure:
1. Select the desired virtual mowing zone from the App's 'Settings' menu and drag it to the desired
position in the zone list.

4.7.25. TEMPORARY NO-CUT ZONE

The 'Temporary No-Cut Zone' function allows a part of the garden to be temporarily excluded from the
mowing area. The selectable area must be a portion of the perimeter between two points A and B selected
by the user, and the straight segment connecting them. The selected area cannot intersect transition
routes.
The robot lawn mower will not enter the excluded zone until the set time has elapsed, but will continue
working in the other parts of the garden.
Procedure:
1. Activate the function from the App's "settings" menu.
2. Follow the App wizard to select the part of the garden to be excluded and set the desired duration.

4.7.26. STAY AWAY

The 'Stay Away' function allows a part of the garden to be temporarily excluded from the mowing area. The
selectable area is a circle of radius chosen by the user and has the GPS position of the mobile device or a
point selected on the virtual map as its centre. The selected area cannot intersect transition routes.
The robot lawn mower will not enter the excluded zone until the set time has elapsed, but will continue
working in the other parts of the garden.
Procedure:
1. Activate the function from the App's "settings" menu.
2. Follow the App wizard to select the part of the garden to be excluded and set the desired duration.
NOTE: If the GPS position of the mobile device is used to set the centre of the circle, the position
of this point, and therefore of the non-cut area, depends on the accuracy of the GPS signal
received from the mobile device, which is generally +/- 5 metres.
46
4. INSTALLATION
EN