IBM 3270 Manual page 70

The Default Control Program Windows
If you are using the default 3270 PC Control
Program, your screen will look like this:
-A-PC
=========:;,
B-HOST - - - - - - - - - - - - - - - ,
IBM 3270 PC Control Program
To go to another window, press Jump
To enlarge a window, press
.~
......
A:
~c-NOTEPAD1------------~
rD-NOTEPAD2------------~
1. Press the Enlarge key (0-0 ).
2. Make sure that the DOS prompt is the last
thing on the screen.
IBM 3270 PC Control Program
To go to another window, press Jump
To enlarge a window, press
'~""'II
3. Continue with the section, "Starting the
Online Tutorial" on page 2-9.
Chapter 2. Using HELPER - The Online Tutorial 2-5