14. Wait until you see this message:
Insert Control Program Diskette 2 of 2 into drive A.
Strike a key when ready ...
15. Remove the first control program diskette
from drive A, and put it away.
16. Insert the second control program diskette (2
of 2) into drive A.
17. Push down the lever on drive A.
18. Press the Space Bar, and you will see these
messages appear on your screen:
Insert Control Program Diskette 2 of 2 into drive A.
Strike a key when ready ..
1 File(s) copied
1 File(s) copied
1 File(s) copied
1 File(s) copied
19. Wait until you see this message appear on the
screen: .
The IBM 3270 PC Control Program is ready for use.
B>
20. Remove the second control program diskette
from drive A, and put it away.
Chapter 1. Setting Up the 3270 PC Control Program
1-35