IBM 3270 Manual page 31

14. Press the Enter key, and wait for these
messages to appear:.
nnnnnnnn bytes total disk space
nnnnnnnn bytes used by the system
nnnnnnnn bytes available on disk
A>
The values nnnnnnnn will appear as decimal
numbers.
15. Continue with the next section.
Copying DOS onto Your Fixed Disk
To copy DOS onto your fixed disk:
1.
Make sure the DOS diskette is still in drive
A.
2. Type:
copy a·* * c:
3. Make sure that you typed this command
exactly with the spaces shown and the colon
(:) at the end.
I
A>,opv ,,": "
4. Press the Enter key.
1-22 Book 2 - Setting Up and Learning