IBM 3270 Manual page 52

B>indfault b:
16. Press the Enter key, and you will see this
message appear on your screen:
Creating the default IBM 3270 PC Control Program; please wait.
Insert diskette for drive A: and strike
any key when ready
Since you have only one diskette drive and
there are many files to be copied, you will be
switching diskettes quite often. The messageE
on the screen will tell you when to switch
diskettes.
• When this message is on the screen:
Insert diskette for drive A: and strike
any key when ready
Replace the diskette in drive A with the
first Control Program Diskette (1 of 2).
• When this message is on the screen:
Insert diskette for drive B: and strike
any key when ready
Replace the diskette in drive A with your
system diskette.
17 . Now, follow the messages on the screen.
After you've made numerous copies, this
message will appear:
Chapter
1.
Setting Up the 3270 PC Control Program 1-43