IBM 3270 Manual page 41

12. Type:
n
Format another (YIN)? n
13. Wait until you see the DOS prom.pt.
14. Remove the DOS diskette from drive A, and
put it away.
From now on, your blank diskette will be called
your system diskette.
You are now ready to copy the default control
program onto your system diskette. Continue
with the next section, "Copying the Default
Control Program onto Your System Diskette."
Copying the Default Control Program onto
Y our System Diskette
To copy the default control program on to your
system diskette:
1.
Get the two 3270 PC Control Program
Diskettes (1 of 2) and (2 of 2) from the plastic
holder in the back of your binder.
2. Insert the first control program diskette
(1 of 2) into drive A.
3. Close the lever on drive A.
1-32 Book 2 - Setting Up and Learning