Step 6. Loading Your Control Program For The First Time - IBM 3270 Manual

Step 6. Loading Your Control
Program for the First Time
You should now have your own copy of the 3270
PC Control Program that you are going to use
every day. Before you can use your control
program, you must load it into the memory in
your 3270 PC. In this step, we will show you how
to load your control program from a system
diskette or from a fixed disk.
Where Is Your Control Program?
Is Your Control Program on a System
Diskette?
Your control program can be on a system
diskette that someone gave you or that you set
up yourself.
If your control program is on a system diskette:
• Skip the next section, and continue with the
section, "Loading the Control Program from a
System Diskette" on page 1-49.
Chapter
1.
Setting Up the 3270 PC Control Program 1-47