IBM 3270 Manual page 22

What to Do Next
You must now prepare your fixed disk or a
system diskette before you can copy the default
control program onto it.
• If you have a fixed disk in your system unit,
go to "Step 3. Preparing Your Fixed Disk" on
page 1-15.
Note: If you are not sure whether you have a
fixed disk drive in your system unit, go
back to Step
1,
and reread the section
"Do You Have a Fixed Disk Drive?" on
page
1-5.
Then, come back here and
continue.
• If you have two diskette drives in your system
unit, skip the next section, and go to "Step 4.
Preparing Your System Diskette Using Two
Diskette Drives" on page 1-29.
• If you have one diskette drive and no fixed
disk in your system unit, skip the next two
sections, and go to "Step 5. Preparing Your
System Diskette Using One Diskette Drive"
on page 1-37.
Chapter 1. Setting Up the 3270 PC Control Program 1-13