IBM 3270 Manual page 32

5. Wait until the DOS files are copied onto your
fixed disk, and the DOS prompt appears on
your screen.
nn File(s} copied
A>
The value nn should be any number but
o.
If
it is 0, make sure that you typed the COPY
command correctly, and try it again. If you
still have trouble, read Appendix A in the
Disk Operating System User's Guide. It is the
small booklet that came with your DOS
manual.
6. Remove the DOS diskette from drive A, and
put it away.
7. Insert the DOS Supplemental Programs
diskette into drive A.
8. Close the lever on drive A.
9. Type:
copy a:*.* c:
10. Make sure that you typed this command
exactly with the spaces shown and the colon
(:) at the end.
I
A>oopv •••• ,
11. Press the Enter key.
Chapter 1. Setting Up the 3270 PC Control Program 1-23