IBM 3270 Manual page 58

Loading the Control Program from a
System Diskette
1. Get your system diskette.
2. Turn your system unit off.
3. Insert your system diskette into drive A.
4. Close the lever on drive A.
5. If you have a color display, turn it on.
6. If you have an expansion unit, turn it on.
7. Turn your system unit on.
Tha t' s all there is to it. The next thing you will
see is the Power-On Self Test run again.
Skip the next section and continue with the
section, "Watching the Power-On Self Test
(POST)" on page 1-51.
Chapter 1. Setting Up the 3270 PC Control Program 1-49