Table of Contents
Advertisement
Troubleshooting Guide
Treadmill will not start.
1)
Make sure the power cord is plugged into a surge protector, the surge protector is plugged into a properly
grounded outlet, and the surge protector is turned on. (Refer to "How to Plug in the Power Cord)
2)
Check the circuit breaker located on the front of the treadmiH. If the switches protrudes, it has tripped. Wailfive
minutes and then press the switch hack in.
3)
Check the house electrical breaker box and the circuit brewer tor the room the treadnnill is located in. If it has
tripped, reset or have an electrician replace the breaker in home.
4)
Have an electrician check for inadequate voltage at Sie outlet.
Treadmill looses power during use.
1j
Check the circuit breaker located on the front of ihe treadmill. Iflhe switches protrudes, it has tripped. Wait five
minutes and then press the switch back in.
2)
Check the house electrical breaker box ^ the drcuit breaker for the room the treadmill Is located In. If it has
tripped, reset or have an electdcian replace the breaker in home.
3)
If treadmill stilt will not operaie, please call our toll-free HELPLINE, (d88) 340-0482
Treadmill walking belt slows during use.
1)
Check to make sure the treadmill is securely plugged into a UL4isted surge protector, rated at 15 amps, with a
14-guage cord of five feeler less and the surge protector is securely plugged Into the outlet
2)
(f treadmill still wilt not operate, please call our lol-tree HELPLINE, (888) 340-0482.
Treadmill walking belt slips or is not centered on rear toller.
1)
Refer to "Bell Adjustment and Tension" section.
2)
Need help'' Calourtoll-free HELPLINE, (888) 340-0482.
Treadmill Error Messages.
Your treadmill is equipped with a software package that enables error messages to be displayed when there is a
problem
To avoid possible damage to the treadmill and the possibility of injury, do not operate the
treadmill until the problem is corrected.
Call our Toll-free HELPLINE. (888) 340-0482 far recaltoration procedures and self check information.
Error Codes include: E11, E22, E33. Sl-1. SI-2
16
Advertisement
Table of Contents
