Table of Contents
Advertisement
Troubleshooting Guide
Treadmill will notstert.
1)
Make sure the power cord is plugged into a surge protector, the surge protector is plugged into a property
grounded outlet, and the surge protector is turned on. (Refer to "How to Plug in the Power Cord)
2)
Check the circuit breaker located on the front of the treadmill
If the switches protrudes, it has tripped. Wait five
minutes and then press the switch back In.
3)
Check the house electrical breaker box and the circuit breaker for the room the treadmill is located in. If it has
tripped, reset or have an electrician replace the breaker in home.
4)
Have an electrician check for inadequate voltage at the outlet.
Treadmill looses power during use.
1)
Check the circuit breaker located on the front of the treadmill. If the switches protrudes, it has tripped. Wait five
minutes and then press the switch back in.
2)
Check the house electrical breaker box and the circuit breaker for the room the treadmill is located in. If it has
tripped, reset or have an electrician replace the breaker in home.
3)
If treadmill still will not operate, please call our toll-free HELPLINE. (686) 340-0482.
Treadmill walking belt slows during use.
1)
Check to make sure the treadmill is securely plugged into a UL-listed surge protector, rated at 15 amps, with a
14-guage cord of five feet or less and the surge protector is securely plugged into the outlet
2)
If treadmill still will not operate, please call our tol-free HELPLINE, (888) 340-0482.
Treadmill walking belt slips or is not centered on rear roller.
1)
Refer to "Belt Adjustment and Tension" section.
2)
Need help7 Call our toll-free HELPLINE, (888) 340-0482.
Treadmill Error Messages.
Your treadmill is equipped with a software package that enables error messages to be displayed when there is a
problem.
To avoid possible damage to the treadmill and the possibility of injury, do not operate the
treadmill until the problem is corrected.
Call our toll-free HELPLINE, (888) 340-0482 for recalibration procedures and self check information.
Error Codes include: Ell. E22, E33. SI-1. SI-2
16
Advertisement
Table of Contents
