Console Functions - Keys Fitness 8800 Owner's Manual

Console Functions
There are five display windows on the control panel to provide you wilh vital feedback information
TIME WINDOW
• TIME: InOicaies elapsed time after pressing start h mhutes and serxinds {0-99 minLtes, 0-59 seconds}
• INTERVAL TIME: Indicates countdown in seconds to Ihe next interval starting at 5 seconds and counting to 0
seconds
SPEED WINDOW
• SPEED: Indicates MPH (mies per hour) or KMH {kilometer per hour) in .1 increments
DISTANCE
I
CALORIES WINDOW
• DISTANCE: IrfOicaies Miles or kilometers traveled in .01 increments up to 9 99 and 1 increments starting at
10,0
• CALORIES: Indicates estimated calories used based on ISO lb person at the indicated speed, incline, and time
INCLINE WINDOW
• INCLINE: Indicates incline in percent of grade 0*15% in .5 IriCTefnents
« PULSE (8800 Model Only): Indicates current heart rate
« HEART "v" (6800 Model Or^ly): indicates control panel is receive a signal from heart rare transmitter. Heart
will blink on and off if receiving signal from Heart Rate Trarismitter chest strap
CENTER BRICKYARD
• Displays quarter mile track in Manual mode. Indicates position on iracKby a blink. In program mode, shows llie
change in speed profile aaoss the interval range (1-10) and shows position with a blinking action.
SPEED BAR
• The Speed Bar allows the user to adjust Speed quickly. The Speed Bar works in all manual and program
modes To use the Speed Bar, the beB must already be nrwving. Press the desired speed (2 through fl), and
Ihe b'eadmill will slowly reach the speed selected. In program rrKxte, the charge in speed with the Speed Bar
will only work r the current interval. Once the program switches to another interval, the speed will revert back
to the programmed speed.
TOGGLE SWITCHES IN HANDLEBARS FOR SPEED AND INCLINE
Your treadmill is equipped with toggle switches to conveniently charrge the incline and speed without reaching
up to the console, in program mode, ttie change m speed andfor inefine with the toggle switches will only work
in the cument interval. Once the prr>^m switches to another interval, the speed and incline wiJI revert back to
the programmed speed and inclirw.
10