Table of Contents
Advertisement
PRISM
CENTRAL SYSTEM 2
®
ELECTRICAL CONNECTIONS
Make all electrical connections compatible to your local city / state
code.
ELECTRIC SHOCK can kill.
this installation.
•
Turn the input power OFF and unplug the
machine from the receptacle before
working on this equipment.
•
Insulate yourself from the work and ground.
•
Always connect the Prism® Compact to a power supply
grounded according to the National Electrical Code and
local codes.
All electrical wiring which includes primary, secondary
electrician.
ELECTROCUTION HAZARD.
Disconnect mains before servicing. Failure to do so
could result in serious personal injury or death.
Do not attempt installation of this unit unless you are
familiar with the necessary tools, equipment, utility
connections and potential hazards. Installation should be
do so could result in reduced performance of the unit,
serious personal injury or death.
Step 10 - Connect Power To Fan And Control
Panel
1.
Route power cable through cord grip (see Figure
A.13).
2. Connect cable to motor per motor's wiring
instructions (see Figure A.13).
3.
Run power cable into control panel through cord
grip (see Figure A.13).
4.
Connect cable wires to terminals - Green to "GND",
Black to "L" and White to "N" (see Figure A.14).
A-7
INSTALLATION
FIGURE A.13
(1) & (2)
(3)
(4)
Advertisement
Table of Contents
