Table of Contents
Advertisement
Setting fan speed [!]
• Turn the knob @ ¢
page 63, fig. 71
to the
setting you want to adjust fan speed (air
quantity).
If the d ifference between the desired temper-
ature set by you and the vehicle's interior tem-
perature is too great, the fan speed will
change automatica lly. This is done so that the
desired temperature setting is reached as
qu ickly as possible.
Air distribution
Fig. 72
Instrume nt pane l: Location of air vents
"T urn the rotary knob @ ¢
page 63, fig . 71
to the desired setting.
• To open and close the out lets, turn the ad-
j ust ing ring.
• To adju st the direction of the airf low from
the outlet, move the tab in the center of the
outlet in the desired d irect ion. The direction
of the air de livered from the vents can be
adjusted ho rizontally and vertically .
Air distribution :
- In setting
-0,
air flows only to the windows,
vents (!) and @ are open . To defrost the
driver and front passenger side windows
most effectively, the vents @ should be di-
rected toward the side windows .
- In sett ing®, a ir flows only to the driver/
passenger, vents @ and @ are open.
- In sett ing
-0,,
air flows only to the footwell,
vents © are open .
W a rm a nd cold
65
@
Tips
If the difference between the desired tem-
perature you have set and the veh icle's in-
terior temperature
is too high, the fan
speed will change automat ically. This is
done so that the desired temperature set-
ting is reached as quickly as poss ible .
- In set t ing~. air flows o nly t o the windows
and the footwell, vents (!) , @ and © a re
open .
The re are addit ional comb inat ions (through
int ermediate settings) available to adjus t a ir
distribution as needed.
(D
Tips
If the climate controls are running in cool-
ing mode, air should flow mainly from
vents @ and @ . To achieve sufficient cool-
ing, you should never close these vents
complete ly.
Advertisement
Table of Contents
