Table of Contents
Advertisement
Configuring the speakers
TX-SR601/601 E
1. Use the •
and • cursor buttons to
select "3. Speaker Distance" on the
main
menu
and
then
press
the
ENTER button.
The "Speaker Distance" menu appears.
l.Hardware Config
2.Speaker Config
3.Speaker Distance
4.Level Calibration
5.1nput Setup
6.Preference
_IENTERIQuit:ISETUPI
[l_. 57F- D i s%ance
Menu
*****************
3.Speaker Distance
***********************
a.Unit
:feet
b.Front L/R
:12ft_
c.Center
:12ft_
d.Surr Right
: 7ft_
e.Surround Back : 7ft_
f.Surr Left
: 7ft_
g.Subwoofer
: 7ft_
_
Quit:ISETUP I
I tin i _
_ ¢ee'_
2. Use the •
and • cursor buttons to select "Unit" and
then use the •
and •
cursor buttons to select the
desired unit of measure,
feet: Select if you will enter the distances in feet.
meters: Select if you will enter the distances in meters.
3. Use the •
and •
cursor buttons to select"Front
L/R"
and then use the • and • cursor buttons to set the
distance
from the front
speakers
to your
normal
listening position.
4. Use the •
and • cursor buttons to select "Center"
and then use the • and • cursor buttons to set the
distance
from the center
speaker
to your normal
listening position.
Note:
'Ihe speaker
distance
value for cenler
speaker
cannot
be 5 feet (1.5
meters)
higher and 5 feet (1.5 inelers)
lower than the one set to front
speaker.
For example,
if 20 feet (6 meters)
is set for the front
speakers,
then the cenler
speaker
distance
can only be set between
15 and 25 feet (4.5 and 7.5 melers).
5. Use the •
and • cursor buttons to select"Surf
Right"
and then use the • and • cursor buttons to set the
distance
from the surround
right speaker
to your
normal listening position.
6. Use the •
and • cursor buttons to select"Surround
Back" and then use the • and • cursor buttons to set
the distance from the surround back speaker to your
normal listening position.
Note:
The speaker
distance
value for SmTOUnd back speaker
cannot
be 5
feet (1.5 meters)
higher
and 15 feet (4.5 meters)
lower than the one
set to front speaker.
For exalnple,
if 20 feet (6 meiers)
is set for the
front speakers,
then the surround
back speaker
distance
can only be
set between
5 and 25 feet (1.5 and 7.5 ineters).
7. Use the •
and • cursor buttons to select"Surr
Left"
and then use the • and • cursor buttons to set the
distance
from the surround
left speaker
to your
normal listening position.
8. Use the i and • cursor buttons to select"Subwoofer"
and then use the • and • cursor buttons to set the
distance from the subwoofer
speaker to your normal
listening position.
Note:
The speaker
distance
value for subwoofer
speaker
cannot
be 5 feet
(1.5 melers)
higher and 5 feet (1.5 meters)
lower than the one set to
front
speaker.
For exalnple,
if 20 feet (6 inelers)
is set for the front
speakers,
then
the subwoofer
speaker
distance
can only
be set
between
15 and 25 feet (4.5 and 7.5 meters).
Press the RETURN
button to return to the main menu.
Press the SETUP
button on the front panel or SETUP
button on the
remote
controller
button to exit the Setup menu.
I Calibrating the speaker levels
Use
this menu
to set the
volume
for each
speaker
so thai
each
volume
is heard by the lis/ener
at the same
level. This is especially
important
for speaker
layouts
where the left and right speakers
are
a/ different
distances
or in asymmetrical
positions
due
to room
designs
and configurations.
These
settings
and the distance
sellings
performed
in the
Speaker
Distance
menu
are
vital
to create
the
proper
sound space and dynamics.
Note:
The speaker
level
senings
here are not effective
for multi-channel
input sources.
'1%
adjust
the speaker
levels for multi-channel
input
somces,
you will need to use the CH SEL, LEVEL
•,
and LEVEL
•
buttons
on the remote
controller.
See page 44.
TX-SR701/701 E
1,
Use the •
and
•
cursor
buttons
to
select
"4.
Level
Calibration"
on the
main
menu
and
then
press
the
ENTER
button.
The "Level Calibration"
menu appears.
You will hear a pink noise
from the front
lefl speaker.
At this time, the
volume
of
the pink noise will automatically
increase
to a predetermined
reference
level (82).
*
Menu
*****************
l.Hardware Config
2.Speaker C0nfig
3.Speaker Distance
L4.Level Calibration
_.Input Setup
6.Preference
_IENTERIQuit:ISETUPI
[4.L.et.,ei
Ca1
*
Menu
*****************
4 .Level Calibration
***********************
a.Left
OdB
b.
Center
::_
c .Right
:
OdB_
d.
Surr
Right
:
OdB_
e.
Surr
Back
:
OdB_
f.
Surr
Left
:
OdB_
g.
Subwoofer
:
OdB_
_
Quit: ISE'IUP I
LLef-
o
o.
Note:
Speakers
that you
selected
"No" or "None"
for in the "Speaker
Config"
menu
will be disabled.
34
Advertisement
Table of Contents
