Table of Contents
Advertisement
Connections
Connecting a DVD Player with 2-Channel (L/R) Audio Output
¥
Component
video output
Video output
S video output I 1
4.
DVD player (DVD)
L (white)
/
_
Analog
audio
output
R (red)
Digital audio output
(optical)
: Signal flow
4. Connecting
a DVD player (DVD)
Using
an RCA
video cable, connect
the video
output .jack
(composile) of the DVD player to the DVD V IN jack of the TX-
SR701/701E/601/601E
Or if the DVD player has an S video output
.jack, connect it to the DVD S IN .jack with an S video cable Or if
the device has component
video outputs,
connect them to the
COMPONENT
VIDEO INPUT I or 2 .jacks on the TX-SR701/
701E/601/601E
With
the initial
settings
o1' the TX-SR7OI/701E/6OI/601E,
the
DVD input source
is set tbr the COMPONENT
VIDE()
INPUT
I jacks.
If you
connect
the
DVD
player
to the
COMPONENT
VIDEO
INPUT
2 jacks,
this
must
be
changed
at "Input
Setup"
-+
"Component
Video"
(see page 53).
Using
an RCA
audio
connection
cable,
connect
the audio
output
,jacks of the DVD player
to the DVD FRONT
L/R,jacks
of the TX-
SR701/701E/601/601E.
Make
sure thai you
properly
connect
the
left channel
to the L,jack and the right channel
to the R jack.
If the device has a 5.1-channel output, connect the DVD FRONT L/
R, SURR L/R, CENTER, and SUBWOOFER
(5A-channel
input)
,jacks of the TX-SR701/701E/601/601E
to the 5.1-channel output
,jacks of the DVD player. Make sure that you properly connect the
left channels to the L,jacks and the right channels to the R,jacks.
If the device
has a digital output,
connect
it to either
the DIGITAL
IN COAXIAL,jack
or the DIGITAL
IN OPTICAL,jack
of the TX-
SR701/701E/601/601E
depending
on the type of connector
on the
DVD player.
With
the initial
settings
o1' the TX-SR701/701E/6OI/601E,
the
DVD input source
is set for digital input at the OPTICAL
I jack
(OPT
1).
If the digital
connection
is made
a/ a different
,jack, this must
be
changed
at "Input
Setup"
-+ "Digital
Input"
(see page 52).
Note:
If the
DVD
player
has
both
5.1-channel
audio
outputs
and 2-
channel
audio
outputs,
and you want
to connect
the DVD
player
only
using
the
FRONT
L/R ,jacks
on the TX-SR701/701E/601/
601E, use the 2-channel
audio output ,jacks on the DVD player.
18
Advertisement
Table of Contents
