Table of Contents
Advertisement
Connections
AC OUTLETS
'Ihe TX-SR701/701E/601/6OIE
is equipped
with AC mains outlets
for connecting
the power
coMs
from
other
devices
so that
their
power
is supplied
through
the TX-SR701/701
E/601/601E.
By doing
this, you can leave
the connecled
device
turned
on and have the
STANDBY/ON
button
on the TX-SR701/701E/601/601E
turn on
and off the device together
with the TX-SR701/701
E/601/601E.
Tile shape,
number,
and total
capacity
of the AC outlets
may
differ depending
on the area of purchase.
Caution:
Make
sme that the total capacity
of the components
connecled
to
the TX-SRT01/701E/601/601E
does not exceed
the capacity
that is
printed
on the rear panel (e.g., TOTAL
120W).
European and
USA and Canadian
some Asian models
models
RI REMOTE CONTROL
'Ihe
Ill
terminal
on
the
TX-SR701/701E/601/601E
is
for
connecting
other
Onkyo
components
equipped
with the R I same
terminal.
When a component
is connecled
to the
terminal,
it can be
operated
by the remole
controller
supplied
with
the TX-SR701/
701E/601/601E.
In addition,
when you connect
a component
to the
1"211terminal,
you can also
perform
the
system
opera/ions
given
below.
Power
on/ready
function
When
the TX-SR701/701E/601/601E
is in the standby
state,
if an
Ill-connected
component
is turned
on, the TX-SRT01/701E/601/
601E also turns on and the input source
selecled
a/the
TX-SR701/
701E/601/601E
aulomatically
swilches
to thai component.
Be aware that this function
will not work if the power coM for the -
connected
component
is connecled
to the AC OUTLFF
on the TX-
SRT01/701E/601/601E,
or if the TX-SRT01/701E/601/601E
has
already
been turned on.
Direct
change
function
When
the play button
is pressed
a/ an Ill-connected
component,
the
input
source
selecled
at
the
TX-SR701/701E/601/601E
automatically
changes
to that component.
Power
off function
When the TX-SR701/701
E/601/601E
is placed
in the standby
state,
all Ill-connected
components
are also automa/ically
put into the
standby
stale.
Also, if you press
the ON button
on the TX-SR701/701E/601/601E
remote
controller
while the TX-SR701/701
E/601/601E
is turned on,
all gl-connecled
components
(DVD
players,
CD players,
MD
recorders,
tuners, etc.) are also mined
on.
Dimmer
function
The Dimmer
function
(display
brightness
adjustment)
of the TX-
SRT01/701E/601/601E
can
be used
to synchronize
the
display
brightness
on the connected
device
using the I:t I connection.
Caution:
If an MD recorder
is connected
to the TAPE,jack
on the TX-SR701/
701E/601/601E,
switch
the Input Selector
from TAPE
to MD (see
page 43).
_-..........-
==c:Ii_
R I connector
TX-SR701/701 E/601/601 E
Ex: Onkyo CD player
/_::]
_4:::::IIm_-.......---
/q::/
RI
connector
\
dEX:cOnkyocassette tape\_-]-_:4ZSItiii:--------
To connect
components
using the Ill
/erminal,
simply
connect
a
remote
control
cable from this 1"211lerminal
to the Il I lerminal
of
the other component.
An Ill
remole
control
cable with a I/8-inch
(3.5-mm)
minia/ure
two-conductor
plug comes
with every
cassette
tape deck, compact
disc player,
MD recorder,
and DVD player
that
has an Il I lerminal.
•
When
performing
operations
with
Ill-connected
components
using the Il I system,
do not use the remote
zone (Zone 2).
•
For remote
control
operation,
the audio
connection
cables
must
a]so be connected.
•
If a component
has two Il I lerminals,
you can use either one to
connect to the TX-SRT01/701E/601/601E.
The other one can be
used to daisy chain with another
component.
•
With Onkyo
DVD players,
you can enter the pre-program
code
so thai you can operate
the DVD player directly
with the remote
controller
without
connecting
the Ill
terminals
(see page 67).
24
Advertisement
Table of Contents
