Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Onkyo TX-SR373
Summary of Contents for Onkyo TX-SR373
- Page 1 Operating Instructions AV RECEIVER TX-SR373...
-
Page 2: Table Of Contents
3 Basic Setup 6 Setup Thank you for buying this Onkyo product. Please read through these operating instructions so you will know how to ......29... -
Page 3: Before You Start
Before you start Flow of settings on the receiver The unit is a full-fledged AV receiver equipped with an Making the initial settings according to the region Checking what’s in the box abundance of functions and terminals. It can be used easily and environment in which you live after following the procedure below to make the connections Please check that you’ve received the following supplied... -
Page 4: Controls And Displays
Controls and displays Front panel MASTER VOLUME TUNING PRESET ON / STANDBY LISTENING MODE BLUETOOTH STEREO SURROUND HOME ENTER RETURN B D/DVD CBL /SAT STRM BOX GAME TUNER SETUP MIC PHONES TONE 5V / 0.5A TX- SR373 AV RECEIVER HOME/ENTER/RETURN TONE ÍON/STANDBY buttons... -
Page 5: Display
Controls and displays Display Tuner indicators DTS indicators RDS – Lights when an RDS broadcast is received DTS – Lights when a source with DTS encoded audio (page 24). (For Europe) signals is detected. ST – Lights when a stereo FM broadcast is being HD –... -
Page 6: Remote Control
Turns ON and OFF the LATE NIGHT function (page 26). AUDIO SEL AUDIO SEL will enable you to control other Onkyo components with the M.OPT remote control. Press to restore CD quality sound to compressed audio LATE NIGHT LATE NIGHT... -
Page 7: Loading The Batteries
Controls and displays Loading the batteries Operating range of remote control The remote control may not work properly if: • There are obstacles between the remote control and the receiver’s remote sensor. • Direct sunlight or fluorescent light is shining onto the remote sensor. -
Page 8: Connecting Your Equipment
Connecting your equipment Hints on the speaker placement Placing the speakers Where you put your speakers in the room has a big effect on the quality of the sound. The By connecting the left and right front speakers (L/R), the center speaker (C), the left and right following guidelines should help you to get the best sound from your system. -
Page 9: Connecting The Speakers
Connecting your equipment Subwoofer Front right Front left Connecting the speakers Center The receiver will work with just two stereo speakers (the front speakers in the diagram) but using at least three speakers is recommended, and a complete setup is best for surround LINE LEVEL sound. -
Page 10: Making Cable Connections
Connecting your equipment • If the video signal does not appear on your TV, try Note Making cable connections adjusting the resolution settings on your component or ®/ • Use a High Speed HDMI ™ Cable. If HDMI cable other display. -
Page 11: Analog Audio Cables
Connecting your equipment Analog audio cables Standard RCA video cables About video outputs connection Use stereo RCA phono cables to connect analog audio These cables are the most common type of video connection This receiver is not loaded with a video converter. When you components. -
Page 12: Connecting A Tv And Playback Components
Connecting your equipment Connecting a TV and playback components HDMI/DVI-compatible components Game console Blu-ray Disc/DVD Streaming media player player Set-top box Connecting using HDMI If you have an HDMI or DVI (with HDCP) equipped component (Blu-ray Disc player, etc.), you can connect it to this receiver using a commercially available HDMI cable. -
Page 13: Connecting Your Component With No Hdmi Terminal
Connecting your equipment Connecting your component with no HDMI Blu-ray Disc/DVD terminal player Set-top box This diagram shows connections of a TV and Blu-ray Disc/ DVD player (or other playback component) with no HDMI Select one Select one terminal to the receiver. VIDEO OUT VIDEO OUT ANALOG AUDIO OUT... -
Page 14: Connecting Antennas
Connecting your equipment To improve AM reception Place the AM antenna on a flat surface and in a direction Connecting antennas giving the best reception. Connect a 5 m to 6 m length of vinyl-coated wire to the AM antenna terminal without disconnecting the supplied AM loop Connect the AM loop antenna and the FM wire antenna as Connect the FM wire antenna into the FM antenna antenna. -
Page 15: Connecting A Usb Device
A damaged power cord can cause a fire or give you an PRESET electrical shock. Check the power cord once in a while. When you find it damaged, ask your nearest Onkyo authorized service center or your dealer for a replacement. •... -
Page 16: Basic Setup
Basic Setup BD/DVD Automatically setting up for surround sound Switch on the receiver and your TV. Press button on the remote control to switch to BD/DVD entry. (AccuEQ Room Calibration) Switch the TV input to the input that connects this receiver to the TV through the corresponding HDMI Press button. -
Page 17: Other Problems When Using The Accueq Room Cal. Setup
Basic Setup ENTER Other problems when using the AccuEQ Room Wait for the test tones to finish. Make sure “OK” is selected, then press If the screen in step 10 is left untouched for 10 seconds Cal. setup A progress report is displayed on-screen while the ENTER is not pressed in step 11, the AccuEQ receiver outputs test tones to determine the speakers... -
Page 18: Basic Playback
Basic playback Note Selecting the audio input signal Playing a source • You may need to check the digital audio output settings on The audio input signal can be selected for each input source. Here are the basic instructions for playing a source (such as your DVD player or digital satellite receiver. - Page 19 Basic playback • When digital input (optical or coaxial) is selected, this receiver can only play back Dolby Digital, PCM (32 kHz to 96 kHz) and DTS (including DTS 96 kHz/24 bit) digital • In order to enjoy the picture and/or sound from devices connected to each terminal, select the input by doing the following. signal formats.
-
Page 20: Playing A Usb Device
• MP3 (MPEG-1/2/2.5 Audio Layer 3) – Sampling rates: • Onkyo cannot guarantee compatibility (operation and/or LATE NIGHT LATE NIGHT 32 kHz/44.1 kHz/48 kHz; Bit rates: 32 kbps to 320 kbps bus power) with all USB mass storage devices and (128 kbps or higher recommended);... -
Page 21: Music Playback Using Bluetooth ® Wireless Technology
Use of this unit is limited to home use. (Transmission procedure on it. distances may be reduced depending on communication • This unit will be displayed as “Onkyo TX-SR373” on environment). all BLUETOOTH capable devices that you have. -
Page 22: Listening To The Radio
Basic playback In the following locations, poor condition or inability to receive When changing connections of audio or other cables for Improving FM sound radio waves may cause the audio to be interrupted or products supported by this unit, confirm that you have If the TUNE or ST indicators don’t light when tuning to an FM stopped: sufficient working space in the surrounding area. -
Page 23: Listening To Station Presets
Basic playback Note Listening to station presets An introduction to RDS (For Europe) • In addition, there are three other program types, ALARM, You will need to have some presets stored to do this. See Radio Data System (RDS) is a system used by most FM ALARMTST, and NO TYPE. -
Page 24: Displaying Rds Information
Basic playback Displaying RDS information DISPLAY Use the button to display the different types of RDS information available. … DISPLAY Press for RDS information. Each press changes the display as follows: Listening mode • • Master volume • Radio Text (RT) – Messages sent by the radio station. For example, a talk radio station may provide a phone number as RT. -
Page 25: Listening To Your System
Listening to your system Type of surround modes Suitable sources Choosing the listening mode Using Direct Two channel sources This receiver offers a variety of listening modes to Use the Direct modes when you want to hear the truest accommodate playback of various audio formats. Choose possible reproduction of a source. -
Page 26: Setting The Audio Options
Listening to your system Setting/What it does Option(s) Setting/What it does Option(s) Setting the Audio options CH1 – Channel 1 0 to 7 There are a number of additional sound settings you can DUAL MONO C.WIDTH (Center Width) is heard only Default: 3 make using the QUICK MENU menu. -
Page 27: Displaying The Fixed Pcm Setting Menu
Listening to your system • The functions that can be set differ depending on the input signal or speaker settings. Displaying the Fixed PCM Setting menu DIRECT STEREO SURR Using the headphones The Fixed PCM Audio options are not displayed by default. Analog signal Other signals Perform the following operations to display them. -
Page 28: Changing The Frequency Step Of Am Radio
Listening to your system Changing the frequency step of AM Radio If you find that you can’t tune into stations successfully, the frequency step may not be suitable for your country/region. Here’s how to switch the setting: Switch the receiver into standby. ... -
Page 29: Setup
Setup Using the Setup Select the setting you want to adjust. Manual speaker setup The following section shows you how to make detailed This receiver allows you to make detailed settings to optimize Setup settings to specify how you’re using the receiver, and also the surround sound performance. -
Page 30: X.over
Setup • Surr – Select LARGE if your surround speakers X.Over Select ‘Manual SP Setup’ from the Setup. reproduce bass frequencies effectively. Select SMALL to • Default setting: 100Hz send bass frequencies to the other speakers or Select ‘Channel Level’ from the Manual SP Setup This setting decides the cutoff between bass sounds playing subwoofer. -
Page 31: Speaker Distance
Setup Adjust the level of each speaker as the test tone is The Input Assign menu The Auto Power Down menu emitted. Note (CD) audio input terminal is assigned to CD under factory Set to automatically turn off the receiver after a specified time settings, but this can be changed to TV input. -
Page 32: The Hdmi Setup Menu
Setup • The CEC (Consumer Electronic Control) function may The HDMI Setup menu Choose the ‘4k60p Setting’ setting you want. activate when the ARC function is turned ON, causing If the TV to be connected using HDMI supports 4K/60p, power to turn ON and OFF and the input to switch from If your TV supports an audio return channel (ARC) function, you can switch the 4k60p setting in accordance with TV one to another. -
Page 33: Additional Information
Route any loose cables away from the antenna terminals and The temperature within the unit has exceeded the allowable ask your nearest Onkyo authorized independent service wires. value. Try moving the unit for better ventilation. -
Page 34: Hdmi
Additional information The display is dark. HDMI Important information regarding the HDMI DIMMER Press on the remote control repeatedly to return to connection the default. No picture or sound. If the problem still persists when connecting your HDMI ... -
Page 35: Resetting The Main Unit
Additional information Digital In/Out Section Resetting the main unit Specifications HDMI terminal ..... . . Type A (19-pin) HDMI output type ......5 V, 55 mA Use this procedure to reset all the receiver’s settings to the Audio section USB terminal . - Page 36 Additional information Furnished Parts Setup microphone ....... 1 Remote control ....... . . 1 Dry cell batteries (AAA size IEC R03) .
-
Page 37: Software License Notice
Additional information Finally, any free program is threatened constantly by software patents. These requirements apply to the modified work as a whole. If identifiable Software license notice We wish to avoid the danger that redistributors of a free program will sections of that work are not derived from the Program, and can be individually obtain patent licenses, in effect making the program reasonably considered independent and separate works in themselves,... - Page 38 Additional information However, parties who have received copies, or rights, from you in detail to address new problems or concerns. This program is free software; you can redistribute it and/or modify it under this License will not have their licenses terminated so long as Each version is given a distinguishing version number.
- Page 39 2-3-12, Яэсу, Чуо-ку, г. Токио, 104-0028, ЯПОНИЯ The above-mentioned information is subject to change without prior notice. Visit the Onkyo web site for the latest update. (C) Copyright 2016 Onkyo & Pioneer Corporation Japan. All rights reserved. F1610-0 SN 29402897...