Cw Id - Kenwood TKR-D710 Function Reference

8

CW ID

CW ID is the function to automatically send the Morse code configured for a channel at certain time intervals. A CW
ID can be sent by configuring a maximum of 32 alphanumeric characters and symbols.
A CW ID can also be sent when a PF key is operated, when a signal is applied to an AUX Input port, or when the
repeater is turned on.
Trigger
PF key
AUX Input Port
Startup
CW ID can be enabled or disabled for each channel by using KPG-174D. Also, the following functions related to CW
ID transmission can be configured:
• CW ID
• Transmit Interval Time
• Transmit Delay Time
• CW Speed (CW ID)
• CW Modulation Delay Time (CW ID)
• Audio Frequency (CW ID)
• Interval Activity Transmit
• CW ID Override
• CW ID on Channel Change
• Encode with QT/DQT (CW ID)
Note
• The repeater switches to analog modulation mode when the repeater sends a CW ID on a DMR digital channel. However, the
CW ID Override and Encode with QT/DQT functions cannot be used on a DMR digital channel.
• The CW ID On function cannot be activated while a CW ID is being sent.
Configuration using KPG-174D
Configuring CW ID to be enabled or disabled (
FUNC (E)/Ver 2.50
Table 8-1 Sending a CW ID
Assigned Function
CW ID On
Edit > Channel Information > Channel Edit)
See
See
Available Functions for the PF Keys
Available Functions for the AUX Input
Ports
Available Functions for Startup
CONTENTS INDEX 61