Restricting The Continuous Transmission Time (Time-Out Timer (Tot)) - Kenwood TKR-D710 Function Reference

4 TRANSMISSION/ RECEPTION/ REPEAT

4.7 Restricting the Continuous Transmission Time (Time-out Timer (TOT))

4.7 Restricting the Continuous Transmission Time (Time-out Timer (TOT))
Time-out Timer (TOT) is the function to restrict the continuous transmission time for the repeater.
This function is used to prevent a user from occupying the repeater and the frequency when the repeater and the
frequency are shared with other users. The repeater automatically stops transmitting and releases the channel if the
repeater continuously transmits longer than the amount of time configured for this function.
Time-out Timer can be configured for each system. Also, the timers relevant to the Time-out Timer function, such
as TOT Pre-alert, TOT Rekey Time, and TOT Reset Time, can be configured.
Each function of Time-out Timer for transmission by the PTT (microphone) switch and for transmission by the
Console PTT control can be configured by using KPG-174D.
Note
• If a channel is changed or the repeater is turned off, the countdown for Time-out Timer is reset.
• If "Off" is configured in Time-out Timer, the repeater does not terminate transmitting by timeout.
• Time-out Timer does not function when a CW ID is transmitted, and when an Air Remote code or Transpond code for Remote
Control is transmitted.
Configuration using KPG-174D
• Configuring Time-out Timer (TOT) for transmission using the PTT (microphone) switch (
Features > Common Page 2 > Local Mic PTT)
• Configuring Time-out Timer (TOT) for transmission using the Console PTT control (
Features > Common Page 2 > Console PTT)
FUNC (E)/Ver 2.50
Edit > Optional
See
Edit > Optional
See
CONTENTS INDEX 19