Kenwood TKR-D710 Function Reference page 150

A APPENDIX
A.2 Available Functions for Startup
Function Name
Encode Signaling Disable
Encode Signaling Enable
Repeat Disable
Repeat Enable
Squelch Off
Squelch On
Test Tone Off
Test Tone On
TOT Disable
TOT Enable
TX Disable
TX Enable
Configuration using KPG-174D
Assigning functions to Startup (
FUNC (E)/Ver 2.50
Disables the signaling encode with the QT tone or DQT code.
Transmission is started with "None" configured in QT/DQT Decode
even on a channel with the QT tone or DQT code configured.
Enables the signaling encode with the QT tone or DQT code.
The repeater sends the QT tone or DQT code configured for the
channel when the repeater transmits.
Disables the capability to transmit the received signal by using the
Repeat PTT control.
Enables the capability to transmit the received signal by using the
Repeat PTT control.
The repeater opens squelch and unmutes the speaker.
Closes the squelch and mutes the received audio.
Stops transmitting a test tone.
Starts transmitting a test tone.
Disables Time-out Timer.
Enables Time-out Timer.
Disables all transmissions.
Enables all transmissions.
Edit > Optional Features > Other > Startup)
See
LCD Display Corresponding PF Keys
Refer to Toggling the QT/
DQT Encode Between
Enabled and Disabled
(Encode Signaling Enable/
Disable).
Refer to Toggling Repeat
Behaviors Between
Enabled and Disabled
(Repeat Enable/Disable).
Refer to Temporarily
Disabling the Squelch
(Squelch Off).
Refer to Transmitting a
Test Tone during
Transmission (Test
Refer to Restricting the
Continuous Transmission
Time (Time-out Timer
(TOT)).
Refer to Toggling All
Transmissions by Using
PTT Controls Between
Enabled and Disabled (TX
Enable/Disable).
CONTENTS INDEX
Tone).
132