Honda CB350 Repair Manual page 76

ENGINE AND TRANSMISSION 71
ring fromthe centerofthe clutch hub and
remove the hub. Remove the stop ring
and remove the steel plate from the hub.
4. Remove the centrifugal oil filter as
described previously. On 350 models, re—
move the outside primary gear. On 360
models, remove the oil pump idler gear
and shaft.
5. 350 models: Bend back the lock—
tabs an the oil pump set plate, and re—
move the three mounting bolts.
6. The clutch housing can nowbe re—
moved. On 350 models, the oil pump is
removed with the clutch housing. The
primary gear on 360 models and the in—
side primary gear on 350 models can now
be removed.
Removing the clutch "Khousing and oil pump
together (350)
Bending down the oil filter locktabs Removing the connecting rod snap—ring