LUBRICATION SYSTEM
97
two rotors. If the clearance exceeds the
rotors. If the side clearance exceeds the
service limit, replace the pump.
service limit given at the end of this
3. Measure the side clearance of the
chapter, replace the pump.
Oil Pump Specifications
CB/CL350, K1, K2/81850
Item
Standard Value (mm/in.)
Service Limit (mm/in.)
Oil pump bore diameter
16.000—16.018/0.630—0.631
16.1/0.634
Oil pump piston diameter
15.955—15.970/0.628—0.629
15.930/0.627
CB/CL360
Oil pump outer rotor—to—pump
0.15—0.21/0.0059—0.0083
0.35/0.0138
body clearance
Radial clearance of oil pump
0.02—0.08/0.0008—0.0032
0.1/0.0039
outer rotor