Honda CB350 Repair Manual page 56

ENGINE AND TRANSMISSION 51
Removing the cylinders
Removing a piston wrist pin
Removing the tensioner roller assembly
and remove the tensioner roller as—
sembly.
15. Stuffa clean lint—free cloth into the
crankcase under the pistons. Remove the
circlip from the outside of each piston
and push the wrist pin out from the in—
side. Remove the pistons and mark their
location on the inside of the skirt.
CAUTION: Do not strike the wrist pin
to removeit as the connecting rod may
be damaged if struck. If the wrist pin
resists removal, heat the piston crown Mark the pistons for location