Connecting The Repienishment Tanks.26 - Kodak X-OMAT M6B Installation Instructions Manual

Connecting the Replenishment Tanks
[1] Install the STRAINERS.
[2] Connect the 10 mm (3/8 in.) TUBING (not supplied) from the inlets of the REPLENISHMENT PUMP
ASSEMBLY to the DEVELOPER and FIXER REPLENISHMENT TANKS.
To prevent contamination of the processor solutions, check that the DEVELOPER and FIXER
REPLENISHMENT TUBES are connected to the correct tanks.
H048_0110BCA
H048_0110BA
Figure 27 Connecting Replenishment Tubing
26 246626