Automatically Changing One Touch Settings With The Sections - Ots Link; Registering The Panel Controls In One Touch Setting (One Touch Setting) - Yamaha PF-1000 Owner's Manual

Styles
Automatically Changing One Touch Settings with the Sections — OTS Link
The convenient OTS (One Touch Setting) Link function lets you automatically have One Touch Settings change when
you select a different Main section (A - D).
1
AUTO FILL IN OTS LINK
E
To cancel the OTS Link function, press the [OTS LINK] button again.
ND

Registering the Panel Controls in One Touch Setting (ONE TOUCH SETTING)

This section covers how to create your own One Touch Setting setups (four setups per style). For a list of One Touch
Setting setup parameters, refer to the separate Data List (Parameter Chart).
1
Select a style.
4
Press one of the ONE TOUCH SETTING buttons:[1] through [4].
The items you can register in a One Touch Setting are Voice, Harmony and Pedal settings.
A message prompting you to save the current style will appear. Select "YES"
E
to call up the STYLE display, then save the panel settings (page 38, 44).
ND
68
PF-1000
2
When you switch among the Main sections (A
- D), the corresponding One Touch Setting will
be called up automatically.
The Main sections A, B, C, and D correspond
to One Touch Settings 1, 2, 3, and 4,
respectively.
2
Set up the panel controls
such as selecting a voice
as required.
1 2 3 4
ONE TOUCH SETTING
The One Touch Settings
can be set to change with
the sections in one of two
different timings (page 127):
• Immediately when you
press a section button.
• At the next measure (in
an accompaniment style),
after you press a section
button.
3
Press the [MEMORY]
button.
Unless you store the panel
settings here, the registered
settings will be deleted
when you select a different
accompaniment style.
MEMORY