Yamaha PF-1000 Owner's Manual page 39

Example — Open/Save display for Voice
Each Open/Save display consists of PRESET, USER, and FLOPPY DISK drive pages.
PRESET drive
The files that are pre-
programmed and installed
internally to the PF-1000 are
kept here. Preset files can be
loaded but cannot be re-written.
However, you can use a preset
file as a basis for creating your
own original file (which can be
saved in the USER or FLOPPY
DISK drive).
File
All data, both pre-
programmed and your own
original, are stored as "files."
Basic Operations — Organizing Your Data
USER drive
Files kept here are those
containing your own original
data, created or edited using the
various functions of the PF-1000.
They are stored internally to the
PF-1000.
Current Memory
"Current Memory" is the area where the voice is called up when
you select a voice. Also it is the area where you edit your voice
using the SOUND CREATOR function. Your edited voice should
then be saved as a file in the USER or FLOPPY DISK drive.
Recording songs (page 90) and creating accompaniment styles
(page 106) are done within the current memory. Please make
sure to properly save this data to the USER/FLOPPY DISK drive as
a file or files. The data will be lost if you turn off the power
without saving.
FLOPPY DISK drive
You can also store your original
data to floppy disk.
Commercially available disk
software can also be called up
here. Naturally, these files are
available only when the
appropriate disk is inserted in
the floppy disk drive.
BACK NEXT
Changes drives among
PRESET, USER and
FLOPPY DISK.
Calls up the upper
level directory page.
In this example, the
voice folder selection
page can be called
up.
39
PF-1000