Setting The Level Balance And Voice - Volume/Voice - Yamaha PF-1000 Owner's Manual

Setting the Level Balance and Voice — Volume/Voice
The operations for this page apply to step 2 of the procedure on page 116.
1
Use these to select the
VOICE, PANPOT, or
VOLUME parameter rows.
Each press of this
button switches
among the various
parts/channels.
A
B
C
D
E
DIGITAL
STUDIO
SOUND
CREATOR
DIGITAL
RECORDING
MIXING
CONSOLE
BALANCE
PART
CHANNEL
1
ON/OFF
PART
These let you select the voice of each part, and adjust the panpot and volume.
VOICE Calls up the VOICE display, from which you can select the desired voice (page 54). When
the Style/Song part is selected, User voices cannot be selected.
PANPOT Determines the stereo position of the selected voice or track. A setting of 0 pans the sound
hard left, while 64 is at center, and 127 is at hard right.
VOLUME Determines the level of each channel, giving you fine control over the balance of all the
parts.
2
1 2 3
Selects the XG voices
Selects the voices used to
to be replaced (voices
replace the XG voices (when
usually used when
SONG AUTO REVOICE is
playing back)
set to ON).
Adjust the Volume Balance and Changing Voices — Mixing Console
Set this to ON to enable automatic replacement of
the XG voices (in XG song data) with the special
voices of the PF-1000. To use the normal XG voice
set, turn this off.
2 3 4 5 6
ALL REVOICE
Replaces all of the replaceable XG voices with the
rich and authentic voices of the PF-1000.
4 5 6 7 8
Closes the Auto Revoice
Setup screen without
executing the settings.
F
G
H
I
J
Allows you to select
the specific voice to
be replaced.
7 8
PIANO REVOICE
F
Replaces only the piano
G
voices.
H
BASIC REVOICE
I
Replaces only the
J
recommended voices that
are suitable for playing
back the song.
ALL NO REVOICE
All the voices are returned
to the original XG voices.
Executes the settings and closes the
Auto Revoice Setup display.
When playing GM song data,
channel 10 (in the SONG
CH 9 - 16 page) can only be
used for a Drum Kit voice.
When changing the rhythm/
percussion voices (drum
kits, etc.) of the accompani-
ment style and song from
the VOICE parameter, the
detailed settings related to
the drum voice are reset,
and in some cases you may
be unable to restore the
original sound. In the case
of song playback, you can
restore the original sound
by returning to the begin-
ning of the song and playing
back from that point. In the
case of accompaniment
style play, you can restore
the original sound by select-
ing the same style again.
PIANO and BASIC can be
called up simultaneously.
Keep in mind that using the
Revoice function may result
in unnatural or unexpected
sound, depending on the
particular song data.
PF-1000
117