Setting Up The Pf-1000; About The Pedal Unit; About The Music Rest; Turning The Power On And Off - Yamaha PF-1000 Owner's Manual

Setting Up the PF-1000

You do not need to install the stand to play the PF-1000. However, if you wish to assemble the stand, refer to page 150.

About the pedal unit

Insert the plug of the pedal unit, with the arrow in the
plug facing upward.
VIDE O OUT
L/L+R AUX
IN
R
L/L+R
AC AUX OUT
INLE T R
L LEVEL
PEDA FIXED R
L
AUX PEDA PHON ES
L
MIDI POW ON ER
OFF
IN MIDI HOS T SELE
OUT PC-2 PC-1 CT
Mac TO HOS
THRU T
PE DA L

About the music rest

The PF-1000 is supplied with a music rest that can be
attached to the instrument by inserting it into the holes at
the rear of the control panel.
16
PF-1000
Turning the Power On
and Off
Connect the power cable.
1
First insert the plug of the power cable into the [AC
INLET] on the left side panel, then plug the other end
of the cable into the proper AC outlet on the wall.
AC INL ET
VIDEO
OUT
L/L+R AUX IN
R
L/L+R
AC AUX OUT
INLET R L
LEVEL FIXED
PEDA L R
AUX PEDA PHON ES
L
MIDI POWE
ON R OFF
IN HOST
MIDI PC-2 SELEC
OUT PC-1 T Mac TO HOST
THRU
(The shape of plug differs depending on locale.)
WARNING
Make sure your PF-1000 is rated for the AC voltage supplied in the
area in which it is to be used (voltage rating appears on the name
plate on the bottom panel). In some areas, a voltage selector may be
provided on the bottom panel of the main keyboard unit. Make sure
that the voltage selector is set for the voltage in your area.
Connecting the unit to the wrong AC supply can cause serious
damage to the internal circuitry and may even pose a shock hazard!
Use only the AC power cord supplied with the PF-1000. If the
supplied cord is lost or damaged and needs to be replaced, contact
your Yamaha dealer. The use of an inappropriate replacement can
pose a fire and shock hazard!
The type of AC power cord provided with the PF-1000 may be
different depending on the country in which it is purchased. (In some
areas a plug adaptor may be provided to match the pin configuration
of the AC wall outlets in your area.) DO NOT modify the plug provided
with the PF-1000. If the plug will not fit the outlet, have a proper outlet
installed by a qualified electrician.
240V
VOLTAGE SELECTOR