Connecting Audio & Video Devices - Yamaha PF-1000 Owner's Manual

Using Your PF-1000 with Other Devices
345 Connecting Audio &
Video Devices
You can connect the PF-1000 to a wide range of audio
equipment by using the AUX IN and AUX OUT jacks,
which are located at the bottom left of the instrument.
Connect as shown in the illustrations below using
standard audio cables.
Use audio cables and adaptor plugs with no resistance.
CAUTION
When the PF-1000 AUX OUT jacks are connected to an external
audio system, first turn on the power to the PF-1000, then to the
external audio system. Reverse this order when you turn the power
off.
3 Playing the sounds of the PF-1000
through an external audio system, and
recording the sounds to an external
recorder (AUX OUT jacks)
CAUTION
Never connect the PF-1000 AUX OUT jacks to its AUX IN jacks,
either directly or via external audio equipment. Such connections
could result in a feedback loop that will make normal performance
impossible, and may even damage the PF-1000.
PF-1000
AUX OUT
L/L+R R
Phone plug
(standard)
To powered speaker
When these are connected
(with standard phone
plugs), you can use the
[MASTER VOLUME]
control to adjust the volume
of the sound output to the
external device.
• If you connect the PF-1000 to a monaural device, use only the
AUX OUT L/L+R jack.
142
PF-1000
Cassette tape recorder
stereo system
L R
LEVEL FIXED
RCA pin plug
Audio cable
When these are connected
(with RCA pin plug; LEVEL
FIXED), the sound is output to
the external device at a fixed
level, regardless of the
[MASTER VOLUME] control
setting.
4 Outputting the sound of an external
device through the built-in speakers of
the PF-1000 (AUX IN jacks)
CAUTION
When the PF-1000's AUX IN jacks are connected to an external
device, first turn on the power of the external device, then that of
the PF-1000.
Phone plug
(standard)
• The PF-1000's [MASTER VOLUME] setting affects the input sig-
nal from the AUX IN jacks.
• If you connect the PF-1000 to a monaural device, use only the
AUX IN L/L+R jack.
5 Showing the display of the PF-1000 on a
connected TV monitor (VIDEO OUT)
You can connect the PF-1000 to a television or video
monitor to display the lyrics in your song data or LCD
on a larger screen.
The size and color of the displayed characters can also
be set, as well as the color of the display background
(page 133).
• For information on setting the video standard (NTSC or PAL),
AUX IN
refer to page 133. The default setting is "PAL."
• Use an audio-video cable with good high-frequency characteris-
RCA pin
plug
tics and RCA-type pin jacks to connect the PF-1000 to a televi-
sion or video monitor.
RCA pin
plug
VIDEO OUT
PF-1000
PF-1000
AUX IN
L/L+R R
Tone generator
Audio cable
AUX IN
L/L+R R
LINE OUT
RCA pin
plug
VIDEO IN
Television