Editing Note Events - 1 - 16; Note Events - Yamaha PF-1000 Owner's Manual

Editing Note Events — 1 - 16
From this display, you can edit individual note events (see below). Calling up operations here apply to step 4 on
page 94. Use the [BACK]/[NEXT] buttons to call up the display below.
Use these to move the
cursor up/down and select
the desired event.
Returns to the beginning
position of the current song
(the first note of the first
measure).
Use these to move the
cursor left/right and select
the desired parameter of
the highlighted event. Keep
in mind that moving the
cursor away from the just-
edited value automatically
enters that value.
Determines the current
position of the event being edited.
For coarse adjustment of the event value.
For fine adjustment of the event value.
Cuts (deletes) all selected events. The cut events
are copied and can be pasted to another location.

Note Events

Parameter
Note
Ctrl (Control change)
Prog (Program change)
P.Bnd (Pitch bend)
A.T. (After touch)
Recording Your Performances and Creating Songs— Song Creator
A
B
C
D
E
1 2 3
Adds a new event to the Event List.
Deletes the event at the cursor position.
Description
Determines the pitch, velocity (volume) and length of the note.
Determines the control change number and value. For details on control change messages, refer to the separate
Data List booklet (MIDI Data Format).
Determines the voice (program) number. For details on program change messages and how to set them, refer to
the separate Data List booklet (Voice List).
Determines the pitch bend value.
Determines the after touch value.
4 5 6 7 8
If the value at the cursor has been changed,
pressing this restores the original value.
Copies all selected events. The copied
events can be pasted to another location.
Determines the
channel to be edited.
F
Calls up the Step
Recording display
G
(page 95).
H
Calls up the Filter display
I
(page 105), letting you
select only the events you
J
wish to shown in the
Event List.
Calls up the SONG
display, from which you
can save the edited data.
Holding this button down
while using the [A] and
[B] buttons lets you
select multiple events.
Pastes all cut or copied events to
the selected location.
To actually enter an edited
value, move the cursor away
from the value or press the
SONG [START/STOP] button.
The sound of the voices
recorded with Step recording
may sound slightly different
from the original.
PF-1000
103